代码拉取完成,页面将自动刷新
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// R25 = 100 kOhm, beta25 = 4267 K, 4.7 kOhm pull-up
// 100k ParCan thermistor (104GT-2)
// ATC Semitec 104GT-2 (Used in ParCan)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
const short temptable_5[][2] PROGMEM = {
{ OV( 1), 713 },
{ OV( 17), 300 }, // top rating 300C
{ OV( 20), 290 },
{ OV( 23), 280 },
{ OV( 27), 270 },
{ OV( 31), 260 },
{ OV( 37), 250 },
{ OV( 43), 240 },
{ OV( 51), 230 },
{ OV( 61), 220 },
{ OV( 73), 210 },
{ OV( 87), 200 },
{ OV( 106), 190 },
{ OV( 128), 180 },
{ OV( 155), 170 },
{ OV( 189), 160 },
{ OV( 230), 150 },
{ OV( 278), 140 },
{ OV( 336), 130 },
{ OV( 402), 120 },
{ OV( 476), 110 },
{ OV( 554), 100 },
{ OV( 635), 90 },
{ OV( 713), 80 },
{ OV( 784), 70 },
{ OV( 846), 60 },
{ OV( 897), 50 },
{ OV( 937), 40 },
{ OV( 966), 30 },
{ OV( 986), 20 },
{ OV(1000), 10 },
{ OV(1010), 0 }
};
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。