加入 Gitee
与超过 1200万 开发者一起发现、参与优秀开源项目,私有仓库也完全免费 :)
免费加入
文件
克隆/下载
Kconfig 11.03 KB
一键复制 编辑 原始数据 按行查看 历史
# Copyright (c) 2013-2019 Huawei Technologies Co., Ltd. All rights reserved.
# Copyright (c) 2020-2021 Huawei Device Co., Ltd. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without modification,
# are permitted provided that the following conditions are met:
#
# 1. Redistributions of source code must retain the above copyright notice, this list of
# conditions and the following disclaimer.
#
# 2. Redistributions in binary form must reproduce the above copyright notice, this list
# of conditions and the following disclaimer in the documentation and/or other materials
# provided with the distribution.
#
# 3. Neither the name of the copyright holder nor the names of its contributors may be used
# to endorse or promote products derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
#
# For a description of the syntax of this configuration file,
# see extra/config/Kconfig-language.txt
#
mainmenu "Huawei LiteOS Configuration"
menu "Compiler"
choice
prompt "LiteOS_Compiler_Type"
default COMPILER_CLANG_LLVM
help
Enable arm-himix100 or aarch64-himix100 or compiler.
config COMPILER_HIMIX_32
bool "arm-linux-ohoseabi"
depends on PLATFORM_HI3518EV300 || PLATFORM_HI3516DV300 || PLATFORM_QEMU_ARM_VIRT_CA7
config COMPILER_CLANG_LLVM
bool "clang-llvm"
depends on PLATFORM_HI3518EV300 || PLATFORM_HI3516DV300 || PLATFORM_QEMU_ARM_VIRT_CA7
endchoice
endmenu
menu "Platform"
######################### config options of bsp #####################
source "../../kernel/liteos_a/platform/Kconfig"
######################### config options of cpu arch ################
source "../../kernel/liteos_a/arch/Kconfig"
######################### config options of rootfs #####################
source "../../kernel/liteos_a/kernel/common/Kconfig"
######################### config options of patchfs #####################
source "../../kernel/liteos_a/kernel/common/patchfs/Kconfig"
config QUICK_START
bool "Enable QUICK_START"
default n
depends on DRIVERS && FS_VFS
help
Answer Y to enable LiteOS support quick start.
endmenu
######################### config options of kernel #####################
source "../../kernel/liteos_a/kernel/Kconfig"
######################### config options of lib ########################
source "../../kernel/liteos_a/lib/Kconfig"
######################### config options of compatibility ##############
menu "Compat"
source "../../kernel/liteos_a/compat/posix/Kconfig"
source "../../kernel/liteos_a/bsd/Kconfig"
endmenu
######################### config options of framework ##################
#source "../../frameworks/m2mcomm/Kconfig"
######################## config options of filesystem ##################
menu "FileSystem"
source "../../kernel/liteos_a/fs/vfs/Kconfig"
source "../../kernel/liteos_a/fs/fat/Kconfig"
source "../../kernel/liteos_a/fs/ramfs/Kconfig"
source "../../kernel/liteos_a/fs/nfs/Kconfig"
source "../../kernel/liteos_a/fs/proc/Kconfig"
source "../../kernel/liteos_a/fs/jffs2/Kconfig"
config ENABLE_READ_BUFFER
bool "Enable read buffer Option"
default n
depends on FS_VFS
help
Answer Y to add enable read buffer Option.
config MAX_VNODE_SIZE
int "Vnode max number"
range 0 512
default 512
depends on FS_VFS
help
vnode number, range from 0 to 512.
config MAX_PATH_CACHE_SIZE
int "PathCache max number"
range 0 1024
default 512
depends on FS_VFS
help
pathCache number, range from 0 to 1024.
endmenu
######################## config options of net ############################
source "../../kernel/liteos_a/net/Kconfig"
######################## config options of debug ########################
menu "Debug"
config COMPILE_DEBUG
bool "Enable GCC -g Option"
default n
help
Answer Y to add -g option in gcc command. But the LiteOS size will be much larger.
config PLATFORM_ADAPT
bool "Enable Os_adapt"
default y
help
Answer Y to add os_adapt.c to LiteOS.
config ENABLE_OOM_LOOP_TASK
bool "Enable Oom loop task"
default n
depends on KERNEL_VM
help
Answer Y to enable oom loop kthread to check system out of memory.
config DO_ALIGN
bool "Enable do align for hi3518e"
default y
depends on PLATFORM_HI3518EV200
help
Answer Y to enable do align for hi3518e.
config ENABLE_MAGICKEY
bool "Enable MAGIC KEY"
default y
help
Answer Y to enable LiteOS Magic key.
ctrl + r : Magic key check switch;
ctrl + z : Show all magic op key;
ctrl + t : Show task information;
ctrl + p : System panic;
ctrl + e : Check system memory pool.
config THUMB
bool "Enable Thumb"
default n
help
Answer Y to build thumb version. This will make LiteOS smaller.
config PLATFORM_DVFS
bool "Enable Dvfs"
default n
depends on COMPAT_LINUXKPI
help
Answer Y to enable LiteOS support dynamic voltage and frequency scaling feature for
low power consumption.
config DEBUG_VERSION
bool "Enable a Debug Version"
default n
help
If you do not select this option that means you enable a release version for LiteOS.
It also means you do not want to use debug modules, like shell,telnet,tftp,
,nfs,ramfs proc and memory check.
If you select this option that means you enable a debug version for LiteOS.
That means you want a opposite behaviour compared to release version.
config DEBUG_KERNEL
bool "Enable Debug LiteOS Kernel Resource"
default n
depends on DEBUG_VERSION
help
If you select this option that means you enable debugging kernel resource.
It also means you want to get queue, mutex, semaphore, memory debug information.
That means you want a opposite behaviour compared to release version.
config DEBUG_QUEUE
bool "Enable Queue Debugging"
default n
depends on DEBUG_KERNEL
help
Answer Y to enable debug queue.
config DEBUG_DEADLOCK
bool "Enable Mutex Deadlock Debugging"
default n
depends on DEBUG_KERNEL
help
Answer Y to enable debug mutex deadlock.
config DEBUG_SEMAPHORE
bool "Enable Semaphore Debugging"
default n
depends on DEBUG_KERNEL
help
Answer Y to enable debug semaphore.
source "../../kernel/liteos_a/shell/Kconfig"
config NET_LWIP_SACK_TFTP
bool "Enable Tftp"
default y
depends on SHELL && NET_LWIP_SACK && DEBUG_VERSION
help
Answer Y to enable LiteOS support tftp cmd and tftp tool.
source "../../kernel/liteos_a/net/telnet/Kconfig"
config EXC_INTERACTION
bool "Enable exc interaction"
default n
depends on SHELL
help
Answer Y to enable exception interaction for LiteOS, when the system enter exception, user can also interact with system by shell
command like readreg, writereg,task,hwi.
config SCHED_DEBUG
bool "Enable sched debug Feature"
default n
depends on DEBUG_VERSION
help
If you wish to build LiteOS with support for sched debug.
config USER_INIT_DEBUG
bool "Enable user init Debug"
default n
depends on DEBUG_VERSION
config SHELL_CMD_DEBUG
bool "Enable shell cmd Debug"
default n
depends on DEBUG_VERSION && SHELL
config USB_DEBUG
bool "Enable USB Debug"
default n
depends on SHELL && DRIVERS_USB && DEBUG_VERSION
help
Answer Y to enable LiteOS support usb debug.
use shell command to open the specified debug level print.
config MEM_DEBUG
bool "Enable MEM Debug"
default n
depends on DEBUG_VERSION
help
Answer Y to enable LiteOS support mem debug.
config MEM_LEAKCHECK
bool "Enable Function call stack of Mem operation recorded"
default n
depends on DEBUG_VERSION && MEM_DEBUG
help
Answer Y to enable record the LR of Function call stack of Mem operation, it can check the mem leak through the infomations of mem node.
config BASE_MEM_NODE_INTEGRITY_CHECK
bool "Enable integrity check or not "
default n
depends on DEBUG_VERSION && MEM_DEBUG
config MEM_WATERLINE
bool "Enable memory pool waterline or not"
default n
depends on DEBUG_VERSION && MEM_DEBUG
config VM_OVERLAP_CHECK
bool "Enable VM overlap check or not"
default n
depends on DEBUG_VERSION && MEM_DEBUG
help
Answer Y to enable vm overlap check.
config NULL_ADDRESS_PROTECT
bool "Enable NULL Address protect"
default n
depends on (PLATFORM_HI3518EV200 || PLATFORM_HI3516CV300 || PLATFORM_HI3518EV300 || PLATFORM_HI3516DV300 || PLATFORM_QEMU_ARM_VIRT_CA7) && DEBUG_VERSION
help
Answer Y to set mem address 0~1M prohibit to access, read or write will trigger exception.
endmenu
######################## config options os drivers ########################
menu "Driver"
config DRIVERS
bool "Enable Driver"
default y
help
Answer Y to enable LiteOS support driver.
source "../../kernel/liteos_a/bsd/dev/usb/Kconfig"
source "../../drivers/adapter/khdf/liteos/Kconfig"
source "drivers/char/mem/Kconfig"
source "drivers/char/quickstart/Kconfig"
source "drivers/char/random/Kconfig"
source "../../drivers/liteos/tzdriver/Kconfig"
source "drivers/char/video/Kconfig"
source "../../drivers/liteos/hievent/Kconfig"
endmenu
menu "Security"
source "../../kernel/liteos_a/security/Kconfig"
endmenu
menu "Stack Smashing Protector (SSP) Compiler Feature"
choice
prompt "Enable stack buffer overflow detection"
default CC_STACKPROTECTOR_STRONG
---help---
This option turns on the -fstack-protector GCC feature. This
feature puts, at the beginning of functions, a canary value on
the stack just before the return address, and validates
the value just before actually returning. Stack based buffer
overflows (that need to overwrite this return address) now also
overwrite the canary, which gets detected and the attack is then
neutralized via a kernel panic.
This feature requires gcc version 4.2 or above, or a distribution
gcc with the feature backported. Older versions are automatically
detected and for those versions, this configuration option is
ignored. (and a warning is printed during bootup)
config CC_NO_STACKPROTECTOR
bool "-fno-stack-protector"
config CC_STACKPROTECTOR
bool "-fstack-protector"
config CC_STACKPROTECTOR_STRONG
bool "-fstack-protector-strong"
config CC_STACKPROTECTOR_ALL
bool "-fstack-protector-all"
endchoice
endmenu
马建仓 AI 助手
尝试更多
代码解读
代码找茬
代码优化