节点之间无法自组网

环境信息
两个节点(节点A、节点B)，分别安装了 openEuler 2203 SP3 (非openEuler embedded嵌入式版本)
节点A：运行softbus_server_main
节点B：运行softbus_server_main

然后在两个节点上再分别运行softbus_client_main，发现节点之间无法实现通信、实现自组网。
softbus_client_main代码源自官方文档上的示例： https://openeuler.gitee.io/yocto-meta-openeuler/master/features/distributed_softbus.html# 
参考资料： https://openeuler.gitee.io/yocto-meta-openeuler/master/features/distributed_softbus.html#

softbus_server_main 日志为：
[COMM]softbus server stub init(weak function).
[COMM]loop thread creating Loop-default id 537810496
[COMM][Loop-default]wait looper start ok
[COMM]init looper success.
[CONN]tcp MaxConnNum is 30
[CONN]tcp MaxLen is 3072
[CONN]tcp TimeOut is 100
[CONN]init tcp ok 
[CONN]connect manager init success. 
[CONN]proxy auth byteSize[39992], messageSize[4096]
[TRAN]proxy channel init ok
[TRAN]p2p direct channel not support.
[TRAN]server trans udp channel init success.
[TRAN]InitQos virtual
[TRAN]trans session server list init succ
[AUTH]auth ability is 1
InitDeviceAuthService: [Service]: Start to init device auth service!
HksInitialize[119]: enter initialize

RegisterAbility[32]: register ability i = 0, id = 0x1010014
RegisterAbility[32]: register ability i = 1, id = 0x1010001
RegisterAbility[32]: register ability i = 2, id = 0x1010002
RegisterAbility[32]: register ability i = 3, id = 0x1010065
RegisterAbility[32]: register ability i = 4, id = 0x1010066
RegisterAbility[32]: register ability i = 5, id = 0x1010032
RegisterAbility[32]: register ability i = 6, id = 0x1010003
RegisterAbility[32]: register ability i = 7, id = 0x1010067
RegisterAbility[32]: register ability i = 8, id = 0x1020001
RegisterAbility[32]: register ability i = 9, id = 0x1020002
RegisterAbility[32]: register ability i = 10, id = 0x1020066
RegisterAbility[32]: register ability i = 11, id = 0x1020067
RegisterAbility[32]: register ability i = 12, id = 0x1020003
RegisterAbility[32]: register ability i = 13, id = 0x1050001
RegisterAbility[32]: register ability i = 14, id = 0x1050002
RegisterAbility[32]: register ability i = 15, id = 0x1050066
RegisterAbility[32]: register ability i = 16, id = 0x1050003
RegisterAbility[32]: register ability i = 17, id = 0x1060001
RegisterAbility[32]: register ability i = 18, id = 0x1060002
RegisterAbility[32]: register ability i = 19, id = 0x1060066
RegisterAbility[32]: register ability i = 20, id = 0x1060003
RegisterAbility[32]: register ability i = 21, id = 0x1170001
RegisterAbility[32]: register ability i = 22, id = 0x1170014
RegisterAbility[32]: register ability i = 23, id = 0x10d0014
RegisterAbility[32]: register ability i = 24, id = 0x10e0014
RegisterAbility[32]: register ability i = 25, id = 0x10f0014
RegisterAbility[32]: register ability i = 26, id = 0x11c0014
RegisterAbility[32]: register ability i = 27, id = 0x1180001
RegisterAbility[32]: register ability i = 28, id = 0x1180014
RegisterAbility[32]: register ability i = 29, id = 0x1100014
RegisterAbility[32]: register ability i = 30, id = 0x1110014
RegisterAbility[32]: register ability i = 31, id = 0x1120014
RegisterAbility[32]: register ability i = 32, id = 0x11d0014
RegisterAbility[32]: register ability i = 33, id = 0x1040064
RegisterAbility[32]: register ability i = 34, id = 0x1040065
RegisterAbility[32]: register ability i = 35, id = 0x1040066
RegisterAbility[32]: register ability i = 36, id = 0x1040067
RegisterAbility[32]: register ability i = 37, id = 0x1030033
RegisterAbility[32]: register ability i = 38, id = 0x1030034
RegisterAbility[32]: register ability i = 39, id = 0x1150000
RegisterAbility[32]: register ability i = 40, id = 0x1070000
RegisterAbility[32]: register ability i = 41, id = 0x1080000
RegisterAbility[32]: register ability i = 42, id = 0x1090000
RegisterAbility[32]: register ability i = 43, id = 0x11b0000
RegisterAbility[32]: register ability i = 44, id = 0x1160000
RegisterAbility[32]: register ability i = 45, id = 0x10a0000
RegisterAbility[32]: register ability i = 46, id = 0x10b0000
RegisterAbility[32]: register ability i = 47, id = 0x10c0000
RegisterAbility[32]: register ability i = 48, id = 0x11a0000
RegisterAbility[32]: register ability i = 49, id = 0x1140000
RegisterAbility[32]: register ability i = 50, id = 0x1190000
HksInitialize[121]: leave initialize, result = 0

InitModules: Init modules success!
GetStorageDirPath: [OS]: storageDirFile: /data/data/deviceauth
GetStorageDirPath: [OS]: storageDirFile: /data/data/deviceauth
LoadOsAccountDb: [DB]: Load os account db successfully! [Id]: 0
InitBroadcastManager: [Broadcaster]: Init broadcast manager module successfully!
[COMM]LoopTask[Loop-default] running
[COMM]LoopTask[Loop-default] wait msg list empty
MainRescInit: starting ...
InitIpcCallBackList: initializing ...
InitIpcCallBackList: initialized successful
AddListenerIfNotExist: [End]: Service register listener successfully!
MainRescInit: process done
AddDevAuthServiceToManager: AddSystemAbility to SA manager success
AddMethodMap: process done, ret 0
DeviceAuthIpcInit: device authentication service register to IPC manager done, service running...
InitDeviceAuthService: [End]: [Service]: Init device auth service successfully!
AddListenerIfNotExist: [End]: Service register listener successfully!
[AUTH]auth init succ!
5 nStackXDFinder: NSTACKX_Init:[220] :nstack ctrl create epollfd 6
5 nStackXCoAP: CoapServerInit:[260] :CoapServerInit is called
5 nStackXCoAP: CoapServerInit:[266] :wifi not connected
4 nStackXDFinder: NSTACKX_Init:[241] :DFinder init successfully
[DISC]coap discovery init success.
[DISC]init success
[LNN]lnn capbility is 30
[LNN]meta node init success
[COMM]loop thread creating NotifyLooper id 475182656
[COMM][NotifyLooper]wait looper start ok
[LNN]netlink monitor thread start
[COMM]LoopTask[NotifyLooper] running
[COMM]LoopTask[NotifyLooper] wait msg list empty
ioctl SIOCGIFFLAGS fail, errno = 19
GetNetworkIfIp ifName:eth0 fail
[LNN]get network IP by ifName failed!
ioctl SIOCGIFFLAGS fail, errno = 19
GetNetworkIfIp ifName:wlan0 fail
[LNN]get network IP by ifName failed!
[LNN]set loopback ip as default

[TRAN]register net listener ok
[LNN]lnn config is 10,2
[LNN]full path for 0 is /data/data/dsoftbus/uuid
[LNN]init net builder success
[LNN]InitLaneManager success
[LNN]time sync virtual init success
[LNN]ble heartbeat stub impl init
[COMM]loop thread creating Heartbeat-Looper id 474895936
[COMM][Heartbeat-Looper]wait looper start ok
[LNN]heartbeat(HB) init success
[LNN]lnn delay init len is 0
[COMM][Loop-default]PostMessageAtTime what =0 time=1680596457788524 us
[COMM][Loop-default]PostMessageAtTime. insert
[COMM]DumpLooper. i=0,handler=LnnAsyncHandler,what =0,arg1=0 arg2=0, time=1680596457788524
[LNN]bus center server init ok
[COMM]p2p link not support
[COMM]softbus framework init success.
[COMM]LoopTask[Heartbeat-Looper] running
[COMM]LoopTask[Heartbeat-Looper] wait msg list empty
[COMM]LoopTask[Loop-default], get message. handle=LnnAsyncHandler,what=0,msgSize=0
[COMM]LoopTask[Loop-default], HandleMessage message. handle=LnnAsyncHandler,what=0
ioctl SIOCGIFFLAGS fail, errno = 19
GetNetworkIfIp ifName:eth0 fail
[LNN]get network IP by ifName failed!
ioctl SIOCGIFFLAGS fail, errno = 19
GetNetworkIfIp ifName:wlan0 fail
[LNN]get network IP by ifName failed!
[LNN]set loopback ip as default

4 nStackXDFinder: NSTACKX_RegisterDevice:[387] :begin to NSTACKX_RegisterDevice!
[LNN]update local role from 0 to 1
[LNN]heartbeat(HB) process start.
[LNN]HB post delay msg, what=1 delay=0 msec
[COMM][Heartbeat-Looper]PostMessageAtTime what =1 time=1680596457794751 us
[COMM][Heartbeat-Looper]PostMessageAtTime. insert
[COMM]DumpLooper. i=0,handler=heartbeat_handler,what =1,arg1=2 arg2=0, time=1680596457794751
[COMM]LoopTask[Loop-default], after HandleMessage message. handle=LnnAsyncHandler,what=0
[COMM]LoopTask[Loop-default] wait msg list empty
3 nStackXDFinder: ConfigureLocalDeviceInfo:[895] :Invalid device name. Will use default name
[COMM]LoopTask[Heartbeat-Looper], get message. handle=heartbeat_handler,what=1,msgSize=0
[COMM]LoopTask[Heartbeat-Looper], HandleMessage message. handle=heartbeat_handler,what=1
[LNN]heartbeat(HB) start in status: 2
[LNN]HB FSM process msg(1) done, ret=2, nowstatus=0
[LNN]HB post delay msg, what=7 delay=20000 msec
[COMM][Heartbeat-Looper]PostMessageAtTime what =7 time=1680596477794810 us
[COMM][Heartbeat-Looper]PostMessageAtTime. insert
[COMM]DumpLooper. i=0,handler=heartbeat_handler,what =7,arg1=0 arg2=0, time=1680596477794810
[COMM]LoopTask[Heartbeat-Looper], after HandleMessage message. handle=heartbeat_handler,what=1
[COMM]SoftBusServerStub::OnReceived, code = 0
[IPC LOG ../../depend/ipc/ipc_object_proxy.cpp:12]INSERT PROXY with handle=d84d00000000
[IPC LOG ../../depend/ipc/ipc_proxy_manager.cpp:15]INSERT PROXY with handle=d84d00000000
[COMM]softbus register service success softbus_sample

[COMM]SoftBusServerStub::OnReceived, code = 130
[TRAN]TransCreateSessionServer:pkgName=softbus_sample, sessionName=session_test
[TRAN]TransCreateSessionServer:uid=0, pid=55353
[TRAN]CreateSessionServer ok
[COMM]SoftBusServerStub::OnReceived, code = 128
[DISC]register input bitmap = [128].
[DISC]register all cap bitmap = [128].
4 nStackXDFinder: NSTACKX_RegisterCapability:[508] :Register Capability
[DISC]get auth port from lnn failed.
[DISC]coap start passive publish.
[DISC]ServerPublishService success!
[COMM]SoftBusServerStub::OnReceived, code = 138
[DISC]register input bitmap = [128].
[DISC]register all cap bitmap = [128].
4 nStackXDFinder: NSTACKX_SetFilterCapability:[514] :Set Filter Capability
[DISC]coap start active discovery.
[DISC]ServerStartDiscovery success!
3 nStackXCoAP: CoapServiceDiscoverStop:[631] :clear device list backup
4 nStackXCoAP: CoapServiceDiscoverStopInner:[782] :device discover stopped
4 nStackXDFinder: NotifyDeviceFound:[774] :notify callback: device found callback is null
[COMM]LoopTask[Heartbeat-Looper], get message. handle=heartbeat_handler,what=7,msgSize=0
[COMM]LoopTask[Heartbeat-Looper], HandleMessage message. handle=heartbeat_handler,what=7
[LNN]LnnDumpHbMgrUpdateList count=0
[LNN]LnnDumpHbOnlineNodeList count=0
[COMM][Heartbeat-Looper]PostMessageAtTime what =2 time=1680596477794852 us
[COMM][Heartbeat-Looper]PostMessageAtTime. insert
[COMM]DumpLooper. i=0,handler=heartbeat_handler,what =2,arg1=0 arg2=4, time=1680596477794852
[LNN]HB post delay msg, what=10 delay=15000 msec
[COMM][Heartbeat-Looper]PostMessageAtTime what =10 time=1680596492794856 us
[COMM][Heartbeat-Looper]PostMessageAtTime. insert
[COMM]DumpLooper. i=0,handler=heartbeat_handler,what =2,arg1=0 arg2=4, time=1680596477794852
[COMM]DumpLooper. i=1,handler=heartbeat_handler,what =10,arg1=0 arg2=0, time=1680596492794856
[LNN]HB post delay msg, what=7 delay=300000 msec
[COMM][Heartbeat-Looper]PostMessageAtTime what =7 time=1680596777794859 us
[COMM][Heartbeat-Looper]PostMessageAtTime. insert
[COMM]DumpLooper. i=0,handler=heartbeat_handler,what =2,arg1=0 arg2=4, time=1680596477794852
[COMM]DumpLooper. i=1,handler=heartbeat_handler,what =10,arg1=0 arg2=0, time=1680596492794856
[COMM]DumpLooper. i=2,handler=heartbeat_handler,what =7,arg1=0 arg2=0, time=1680596777794859
[LNN]heartbeat(HB) perform as master node
[LNN]HB FSM process msg(7) done, ret=2, nowstatus=2
[COMM]LoopTask[Heartbeat-Looper], after HandleMessage message. handle=heartbeat_handler,what=7
[COMM]LoopTask[Heartbeat-Looper], get message. handle=heartbeat_handler,what=2,msgSize=2
[COMM]LoopTask[Heartbeat-Looper], HandleMessage message. handle=heartbeat_handler,what=2
[LNN]ble heartbeat stub impl beat once
[COMM][Heartbeat-Looper]LooperRemoveMessage. handler=heartbeat_handler, what =10
[LNN]HB post delay msg, what=8 delay=10000 msec
[COMM][Heartbeat-Looper]PostMessageAtTime what =8 time=1680596487794865 us
[COMM][Heartbeat-Looper]PostMessageAtTime. insert
[COMM]DumpLooper. i=0,handler=heartbeat_handler,what =8,arg1=0 arg2=0, time=1680596487794865
[COMM]DumpLooper. i=1,handler=heartbeat_handler,what =7,arg1=0 arg2=0, time=1680596777794859
[LNN]HB post delay msg, what=6 delay=20000 msec
[COMM][Heartbeat-Looper]PostMessageAtTime what =6 time=1680596497794868 us
[COMM][Heartbeat-Looper]PostMessageAtTime. insert
[COMM]DumpLooper. i=0,handler=heartbeat_handler,what =8,arg1=0 arg2=0, time=1680596487794865
[COMM]DumpLooper. i=1,handler=heartbeat_handler,what =6,arg1=0 arg2=4, time=1680596497794868
[COMM]DumpLooper. i=2,handler=heartbeat_handler,what =7,arg1=0 arg2=0, time=1680596777794859
[LNN]HB FSM process msg(2) done, ret=2, nowstatus=2
[COMM]LoopTask[Heartbeat-Looper], after HandleMessage message. handle=heartbeat_handler,what=2
[COMM]SoftBusServerStub::OnReceived, code = 142
[COMM]LoopTask[Heartbeat-Looper], get message. handle=heartbeat_handler,what=8,msgSize=2

softbus_client_main截图
![softbus_client_main 客户端日志截图](https://foruda.gitee.com/images/1680596679562685797/d2d106f4_8748696.png "client-log.png")

你是执行hichain跑通的吗，我执行hichain错误

错误信息如下：
HichainGmGetGroupInfo:num=1
HichainSaveGroupID:groupID=63B4C69184D09116470567C495299F927D2F6E89092CC28D2E9602D7782F315C
[LNN]NodeStateCbCount is 10
[LNN]BusCenterClientInit init OK!
[DISC]Init success as client side
[TRAN]init tcp direct channel success.
[CONN]proxy auth byteSize[39992], messageSize[4096]
[TRAN]trans udp channel manager init success.
[TRAN]init trans client success
[TRAN]ReCreateSessionServerToServer
[TRAN]ReCreateSessionServerToServer ok
[COMM]softbus server register service success!

[COMM]softbus sdk frame init success.
[COMM]SoftBusClientStub::OnReceived, code = 265
[DISC]Sdk OnPublishSuccess, publishId = 100
<PublishSuccess>CB: publish 100 done
[DISC]PublishService send request ret = 0!
[COMM]exist same pkg name
[COMM]Add CheckPkgNameInfo failed.
[COMM]SoftBusClientStub::OnReceived, code = 262
[DISC]Sdk OnDiscoverySuccess, subscribeId = 100
<DiscoverySuccess>CB: discover subscribeId=100

Input l to list device; Input s to stop:

我还是没有组网成功

src-openEuler/dsoftbus

内容风险标识

评论 (6)