/**
 * Copyright (c) 2014 - 2018, Nordic Semiconductor ASA
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form, except as embedded into a Nordic
 *    Semiconductor ASA integrated circuit in a product or a software update for
 *    such product, must reproduce the above copyright notice, this list of
 *    conditions and the following disclaimer in the documentation and/or other
 *    materials provided with the distribution.
 *
 * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
 *    contributors may be used to endorse or promote products derived from this
 *    software without specific prior written permission.
 *
 * 4. This software, with or without modification, must only be used with a
 *    Nordic Semiconductor ASA integrated circuit.
 *
 * 5. Any software provided in binary form under this license must not be reverse
 *    engineered, decompiled, modified and/or disassembled.
 *
 * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */
/** @file
 *
 * @defgroup ble_sdk_uart_over_ble_main main.c
 * @{
 * @ingroup  ble_sdk_app_nus_eval
 * @brief    UART over BLE application main file.
 *
 * This file contains the source code for a sample application that uses the Nordic UART service.
 * This application uses the @ref srvlib_conn_params module.
 */


#include <stdint.h>
#include <string.h>
#include "nordic_common.h"
#include "nrf.h"
#include "ble_hci.h"
#include "ble_advdata.h"
#include "ble_advertising.h"
#include "ble_conn_params.h"
#include "nrf_sdh.h"
#include "nrf_sdh_soc.h"
#include "nrf_sdh_ble.h"
#include "nrf_ble_gatt.h"
#include "nrf_ble_qwr.h"
#include "app_timer.h"
#include "tuya_ble_service.h"
#include "app_uart.h"
#include "app_util_platform.h"
#include "bsp_btn_ble.h"
#include "app_scheduler.h"
#include "nrf_pwr_mgmt.h"
//#include "rtc.h"
#include "main.h"
#include "tuya_ble_type.h"
#include "tuya_ble_api.h"
#include "tuya_ble_app_demo.h"
#include "tuya_ble_log.h"
#include "tuya_ble_internal_config.h"
#include "ota.h"

#if defined (UART_PRESENT)
#include "nrf_uart.h"
#endif
#if defined (UARTE_PRESENT)
#include "nrf_uarte.h"
#endif

#include "nrf_log.h"
#include "nrf_log_ctrl.h"
#include "nrf_log_default_backends.h"

#define APP_BLE_CONN_CFG_TAG            1                                           /**< A tag identifying the SoftDevice BLE configuration. */

#define DEVICE_NAME                     "TY"                               /**< Name of device. Will be included in the advertising data. */
//#define NUS_SERVICE_UUID_TYPE           BLE_UUID_TYPE_VENDOR_BEGIN                  /**< UUID type for the Nordic UART Service (vendor specific). */

#define APP_BLE_OBSERVER_PRIO           3                                           /**< Application's BLE observer priority. You shouldn't need to modify this value. */

#define APP_ADV_INTERVAL                MSEC_TO_UNITS(200, UNIT_0_625_MS)  /**< The advertising interval (in units of 0.625 ms. This value corresponds to 40 ms). */

#define APP_ADV_DURATION                BLE_GAP_ADV_TIMEOUT_GENERAL_UNLIMITED//MSEC_TO_UNITS(TUYA_ADV_DURATION_MS, UNIT_10_MS)     /**< The advertising duration (180 seconds) in units of 10 milliseconds. */

#define MIN_CONN_INTERVAL               MSEC_TO_UNITS(20, UNIT_1_25_MS)             /**< Minimum acceptable connection interval (20 ms), Connection interval uses 1.25 ms units. */
#define MAX_CONN_INTERVAL               MSEC_TO_UNITS(40, UNIT_1_25_MS)             /**< Maximum acceptable connection interval (75 ms), Connection interval uses 1.25 ms units. */
#define SLAVE_LATENCY                   0                                           /**< Slave latency. */
#define CONN_SUP_TIMEOUT                MSEC_TO_UNITS(4000, UNIT_10_MS)             /**< Connection supervisory timeout (4 seconds), Supervision Timeout uses 10 ms units. */
#define FIRST_CONN_PARAMS_UPDATE_DELAY  APP_TIMER_TICKS(5000)                       /**< Time from initiating event (connect or start of notification) to first time sd_ble_gap_conn_param_update is called (5 seconds). */
#define NEXT_CONN_PARAMS_UPDATE_DELAY   APP_TIMER_TICKS(30000)                      /**< Time between each call to sd_ble_gap_conn_param_update after the first call (30 seconds). */
#define MAX_CONN_PARAMS_UPDATE_COUNT    3                                           /**< Number of attempts before giving up the connection parameter negotiation. */

#define DEAD_BEEF                       0xDEADBEEF                                  /**< Value used as error code on stack dump, can be used to identify stack location on stack unwind. */


#define SCHED_MAX_EVENT_DATA_SIZE           APP_TIMER_SCHED_EVENT_DATA_SIZE            /**< Maximum size of scheduler events. */
#ifdef SVCALL_AS_NORMAL_FUNCTION
#define SCHED_QUEUE_SIZE                    20                                         /**< Maximum number of events in the scheduler queue. More is needed in case of Serialization. */
#else
#define SCHED_QUEUE_SIZE                    20                                         /**< Maximum number of events in the scheduler queue. */
#endif


#define UART_TX_BUF_SIZE                256                                         /**< UART TX buffer size. */
#define UART_RX_BUF_SIZE                256                                         /**< UART RX buffer size. */


BLE_NUS_COMMDATA_DEF(m_nus_commdata, NRF_SDH_BLE_TOTAL_LINK_COUNT);                                   /**< BLE NUS service instance. */
NRF_BLE_GATT_DEF(m_gatt);                                                           /**< GATT module instance. */
NRF_BLE_QWR_DEF(m_qwr);                                                             /**< Context for the Queued Write module.*/
BLE_ADVERTISING_DEF(m_advertising);                                                 /**< Advertising module instance. */

static uint16_t   m_conn_handle          = BLE_CONN_HANDLE_INVALID;                 /**< Handle of the current connection. */
static uint16_t   m_ble_nus_max_data_len = BLE_GATT_ATT_MTU_DEFAULT - 3;            /**< Maximum length of data (in bytes) that can be transmitted to the peer by the Nordic UART service module. */
static ble_uuid_t m_adv_uuids[]          =                                          /**< Universally unique service identifier. */
{
    {0xA201, BLE_UUID_TYPE_BLE},
};


/**@brief Function for assert macro callback.
 *
 * @details This function will be called in case of an assert in the SoftDevice.
 *
 * @warning This handler is an example only and does not fit a final product. You need to analyse
 *          how your product is supposed to react in case of Assert.
 * @warning On assert from the SoftDevice, the system can only recover on reset.
 *
 * @param[in] line_num    Line number of the failing ASSERT call.
 * @param[in] p_file_name File name of the failing ASSERT call.
 */
void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
{
    app_error_handler(DEAD_BEEF, line_num, p_file_name);
}

/**@brief Function for initializing the timer module.
 */
static void timers_init(void)
{
    ret_code_t err_code = app_timer_init();
    APP_ERROR_CHECK(err_code);
}

/**@brief Function for the GAP initialization.
 *
 * @details This function will set up all the necessary GAP (Generic Access Profile) parameters of
 *          the device. It also sets the permissions and appearance.
 */
static void gap_params_init(void)
{
    uint32_t                err_code;
    ble_gap_conn_params_t   gap_conn_params;
    ble_gap_conn_sec_mode_t sec_mode;

    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);

//    err_code = gap_address_change();
//    APP_ERROR_CHECK(err_code);

    err_code = sd_ble_gap_device_name_set(&sec_mode,
                                          (const uint8_t *) DEVICE_NAME,
                                          strlen(DEVICE_NAME));
    APP_ERROR_CHECK(err_code);

    memset(&gap_conn_params, 0, sizeof(gap_conn_params));

    gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
    gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
    gap_conn_params.slave_latency     = SLAVE_LATENCY;
    gap_conn_params.conn_sup_timeout  = CONN_SUP_TIMEOUT;

    err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for handling Queued Write Module errors.
 *
 * @details A pointer to this function will be passed to each service which may need to inform the
 *          application about an error.
 *
 * @param[in]   nrf_error   Error code containing information about what went wrong.
 */
static void nrf_qwr_error_handler(uint32_t nrf_error)
{
    APP_ERROR_HANDLER(nrf_error);
}

/**@brief Function for handling the data from the Nordic UART Service.
 *
 * @details This function will process the data received from the Nordic UART BLE Service and send
 *          it to the UART module.
 *
 * @param[in] p_evt       Nordic UART Service event.
 */
/**@snippet [Handling the data received over BLE] */
static void nus_commdata_handler(ble_nus_evt_t * p_evt)
{

    if (p_evt->type == BLE_NUS_EVT_RX_DATA)
    {
        tuya_ble_gatt_receive_data((uint8_t*)(p_evt->params.rx_data.p_data),p_evt->params.rx_data.length);
        //TUYA_BLE_HEXDUMP("nus_commdata_handler :",20,(uint8_t*)(p_evt->params.rx_data.p_data),p_evt->params.rx_data.length);
    }

}



/**@snippet [Handling the data received over BLE] */


/**@brief Function for initializing services that will be used by the application.
 */
static void services_init(void)
{
    uint32_t           err_code;
    ble_nus_init_t     nus_commdata_init;
    nrf_ble_qwr_init_t qwr_init = {0};

    // Initialize Queued Write Module.
    qwr_init.error_handler = nrf_qwr_error_handler;

    err_code = nrf_ble_qwr_init(&m_qwr, &qwr_init);
    APP_ERROR_CHECK(err_code);

    // Initialize NUS.
    memset(&nus_commdata_init, 0, sizeof(ble_nus_init_t));

    nus_commdata_init.data_handler = nus_commdata_handler;

    err_code = ble_nus_commdata_init(&m_nus_commdata, &nus_commdata_init);
    APP_ERROR_CHECK(err_code);

}


/**@brief Function for handling an event from the Connection Parameters Module.
 *
 * @details This function will be called for all events in the Connection Parameters Module
 *          which are passed to the application.
 *
 * @note All this function does is to disconnect. This could have been done by simply setting
 *       the disconnect_on_fail config parameter, but instead we use the event handler
 *       mechanism to demonstrate its use.
 *
 * @param[in] p_evt  Event received from the Connection Parameters Module.
 */
static void on_conn_params_evt(ble_conn_params_evt_t * p_evt)
{
    uint32_t err_code;

    if (p_evt->evt_type == BLE_CONN_PARAMS_EVT_FAILED)
    {
        err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_CONN_INTERVAL_UNACCEPTABLE);
        APP_ERROR_CHECK(err_code);
    }
}


/**@brief Function for handling errors from the Connection Parameters module.
 *
 * @param[in] nrf_error  Error code containing information about what went wrong.
 */
static void conn_params_error_handler(uint32_t nrf_error)
{
    if(nrf_error==NRF_ERROR_INVALID_STATE)
    {
        NRF_LOG_ERROR("conn_params_error_handler - > NRF_ERROR_INVALID_STATE\n");
    }
    else
    {
        APP_ERROR_HANDLER(nrf_error);
    }
}


/**@brief Function for initializing the Connection Parameters module.
 */
static void conn_params_init(void)
{
    uint32_t               err_code;
    ble_conn_params_init_t cp_init;

    memset(&cp_init, 0, sizeof(cp_init));

    cp_init.p_conn_params                  = NULL;
    cp_init.first_conn_params_update_delay = FIRST_CONN_PARAMS_UPDATE_DELAY;
    cp_init.next_conn_params_update_delay  = NEXT_CONN_PARAMS_UPDATE_DELAY;
    cp_init.max_conn_params_update_count   = MAX_CONN_PARAMS_UPDATE_COUNT;
    cp_init.start_on_notify_cccd_handle    = BLE_GATT_HANDLE_INVALID;
    cp_init.disconnect_on_fail             = false;
    cp_init.evt_handler                    = on_conn_params_evt;
    cp_init.error_handler                  = conn_params_error_handler;

    err_code = ble_conn_params_init(&cp_init);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for putting the chip into sleep mode.
 *
 * @note This function will not return.
 */
static void sleep_mode_enter(void)
{
    uint32_t err_code = bsp_indication_set(BSP_INDICATE_IDLE);
    APP_ERROR_CHECK(err_code);

    // Prepare wakeup buttons.
    err_code = bsp_btn_ble_sleep_mode_prepare();
    APP_ERROR_CHECK(err_code);

    // Go to system-off mode (this function will not return; wakeup will cause a reset).
    err_code = sd_power_system_off();
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for handling advertising events.
 *
 * @details This function will be called for advertising events which are passed to the application.
 *
 * @param[in] ble_adv_evt  Advertising event.
 */
static void on_adv_evt(ble_adv_evt_t ble_adv_evt)
{
    uint32_t err_code;

    switch (ble_adv_evt)
    {
    case BLE_ADV_EVT_FAST:
        err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING);
        APP_ERROR_CHECK(err_code);
        break;
    case BLE_ADV_EVT_IDLE:
        sleep_mode_enter();
        break;
    default:
        break;
    }
}

//extern void mcu_ota_test_para_init_connect(void);
/**@brief Function for handling BLE events.
 *
 * @param[in]   p_ble_evt   Bluetooth stack event.
 * @param[in]   p_context   Unused.
 */
static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
{
    uint32_t err_code;

    switch (p_ble_evt->header.evt_id)
    {
    case BLE_GAP_EVT_CONNECTED:

        NRF_LOG_INFO("Connected");

        tuya_ble_connected_handler();

        err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
        APP_ERROR_CHECK(err_code);
        m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
        err_code = nrf_ble_qwr_conn_handle_assign(&m_qwr, m_conn_handle);
        APP_ERROR_CHECK(err_code);

        break;

    case BLE_GAP_EVT_DISCONNECTED:
        
        NRF_LOG_INFO("Disconnected");
    
        tuya_ble_disconnected_handler();
    
        tuya_ota_init_disconnect();
        // LED indication will be changed when advertising starts.
        m_conn_handle = BLE_CONN_HANDLE_INVALID;
        break;

    case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
    {
        NRF_LOG_DEBUG("PHY update request.");
        ble_gap_phys_t const phys =
        {
            .rx_phys = BLE_GAP_PHY_AUTO,
            .tx_phys = BLE_GAP_PHY_AUTO,
        };
        err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
        APP_ERROR_CHECK(err_code);
    }
    break;

    case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
        // Pairing not supported
        err_code = sd_ble_gap_sec_params_reply(m_conn_handle, BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP, NULL, NULL);
        APP_ERROR_CHECK(err_code);
        break;

    case BLE_GATTS_EVT_SYS_ATTR_MISSING:
        // No system attributes have been stored.
        err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0, 0);
        APP_ERROR_CHECK(err_code);
        break;

    case BLE_GATTC_EVT_TIMEOUT:
        // Disconnect on GATT Client timeout event.
        err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
                                         BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
        APP_ERROR_CHECK(err_code);
        break;

    case BLE_GATTS_EVT_TIMEOUT:
        // Disconnect on GATT Server timeout event.
        err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
                                         BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
        APP_ERROR_CHECK(err_code);
        break;

    default:
        // No implementation needed.
        break;
    }
}


/**@brief Function for the SoftDevice initialization.
 *
 * @details This function initializes the SoftDevice and the BLE event interrupt.
 */
static void ble_stack_init(void)
{
    ret_code_t err_code;

    err_code = nrf_sdh_enable_request();
    APP_ERROR_CHECK(err_code);

    // Configure the BLE stack using the default settings.
    // Fetch the start address of the application RAM.
    uint32_t ram_start = 0;
    err_code = nrf_sdh_ble_default_cfg_set(APP_BLE_CONN_CFG_TAG, &ram_start);
    APP_ERROR_CHECK(err_code);

    // Enable BLE stack.
    err_code = nrf_sdh_ble_enable(&ram_start);
    APP_ERROR_CHECK(err_code);

    // Register a handler for BLE events.
    NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL);
}


/**@brief Function for handling events from the GATT library. */
void gatt_evt_handler(nrf_ble_gatt_t * p_gatt, nrf_ble_gatt_evt_t const * p_evt)
{
    if ((m_conn_handle == p_evt->conn_handle) && (p_evt->evt_id == NRF_BLE_GATT_EVT_ATT_MTU_UPDATED))
    {
        m_ble_nus_max_data_len = p_evt->params.att_mtu_effective - OPCODE_LENGTH - HANDLE_LENGTH;
        NRF_LOG_INFO("Data len is set to 0x%X(%d)", m_ble_nus_max_data_len, m_ble_nus_max_data_len);
    }
    NRF_LOG_DEBUG("ATT MTU exchange completed. central 0x%x peripheral 0x%x",
                  p_gatt->att_mtu_desired_central,
                  p_gatt->att_mtu_desired_periph);
}


/**@brief Function for initializing the GATT library. */
void gatt_init(void)
{
    ret_code_t err_code;

    err_code = nrf_ble_gatt_init(&m_gatt, gatt_evt_handler);
    APP_ERROR_CHECK(err_code);

    err_code = nrf_ble_gatt_att_mtu_periph_set(&m_gatt, NRF_SDH_BLE_GATT_MAX_MTU_SIZE);
    APP_ERROR_CHECK(err_code);
}


void ble_device_disconnected(void)
{
    uint32_t err_code=0;
    
    if(m_conn_handle!=BLE_CONN_HANDLE_INVALID)
    {
        err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
        if (err_code != NRF_ERROR_INVALID_STATE)
        {
            APP_ERROR_CHECK(err_code);
        }
    }
}


/**@brief Function for handling events from the BSP module.
 *
 * @param[in]   event   Event generated by button press.
 */
void bsp_event_handler(bsp_event_t event)
{
    uint32_t err_code;
    switch (event)
    {
    case BSP_EVENT_SLEEP:
        sleep_mode_enter();
        break;

    case BSP_EVENT_DISCONNECT:
        err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
        if (err_code != NRF_ERROR_INVALID_STATE)
        {
            APP_ERROR_CHECK(err_code);
        }
        break;

    case BSP_EVENT_WHITELIST_OFF:
        if (m_conn_handle == BLE_CONN_HANDLE_INVALID)
        {
            err_code = ble_advertising_restart_without_whitelist(&m_advertising);
            if (err_code != NRF_ERROR_INVALID_STATE)
            {
                APP_ERROR_CHECK(err_code);
            }
        }
        break;

    default:
        break;
    }
}


/**@brief   Function for handling app_uart events.
 *
 * @details This function will receive a single character from the app_uart module and append it to
 *          a string. The string will be be sent over BLE when the last character received was a
 *          'new line' '\n' (hex 0x0A) or if the string has reached the maximum data length.
 */
/**@snippet [Handling the data received over UART] */
void uart_event_handle(app_uart_evt_t * p_event)
{
    //static uint8_t data_array[BLE_NUS_MAX_DATA_LEN];
    //static uint8_t index = 0;
    uint8_t rx_char=0;
    uint32_t       err_code;

    switch (p_event->evt_type)
    {
    case APP_UART_DATA_READY:
        UNUSED_VARIABLE(app_uart_get(&rx_char));
        //UNUSED_VARIABLE(app_uart_get(&data_array[index]));
        // index++;
        tuya_ble_common_uart_receive_data(&rx_char,1);
        break;

    case APP_UART_COMMUNICATION_ERROR:
        // APP_ERROR_HANDLER(p_event->data.error_communication);
        break;

    case APP_UART_FIFO_ERROR:
        //APP_ERROR_HANDLER(p_event->data.error_code);
        break;

    default:
        break;
    }
}
/**@snippet [Handling the data received over UART] */


uint32_t ble_nus_send_mtu(const uint8_t * data, uint16_t length)
{
    uint32_t       err_code;
    do
    {
        err_code = ble_nus_commdata_send(&m_nus_commdata, (uint8_t *)data, &length, m_conn_handle);
        if ((err_code != NRF_ERROR_INVALID_STATE) &&
                (err_code != NRF_ERROR_RESOURCES) &&
                (err_code != NRF_ERROR_NOT_FOUND) &&
                (err_code != NRF_SUCCESS))
        {
            NRF_LOG_ERROR("ble nus send mtu error,err_code = %d\n",err_code);
            APP_ERROR_CHECK(err_code);
        }
    } while (err_code == NRF_ERROR_RESOURCES);
}


/**@brief  Function for initializing the UART module.
 */
/**@snippet [UART Initialization] */
void uart_init(void)
{
    uint32_t                     err_code;
    app_uart_comm_params_t const comm_params =
    {
        .rx_pin_no    = RX_PIN_NUMBER,
        .tx_pin_no    = TX_PIN_NUMBER,
        .rts_pin_no   = RTS_PIN_NUMBER,
        .cts_pin_no   = CTS_PIN_NUMBER,
        .flow_control = APP_UART_FLOW_CONTROL_DISABLED,
        .use_parity   = false,
#if defined (UART_PRESENT)
        .baud_rate    = NRF_UART_BAUDRATE_9600
#else
        .baud_rate    = NRF_UARTE_BAUDRATE_115200
#endif
    };

    APP_UART_FIFO_INIT(&comm_params,
                       UART_RX_BUF_SIZE,
                       UART_TX_BUF_SIZE,
                       uart_event_handle,
                       APP_IRQ_PRIORITY_LOW,
                       err_code);
    APP_ERROR_CHECK(err_code);
}
/**@snippet [UART Initialization] */


void update_adv_data(uint8_t const* p_ad_data, uint8_t ad_len)
{
    ret_code_t ret;

    ble_gap_adv_data_t     adv_data;

    //sd_ble_gap_adv_stop(m_advertising.adv_handle);
    sd_ble_gap_adv_set_configure(&m_advertising.adv_handle,NULL,NULL);

    memcpy(&adv_data,&m_advertising.adv_data,sizeof(ble_gap_adv_data_t));

    memcpy(adv_data.adv_data.p_data,p_ad_data,ad_len);

    adv_data.adv_data.len = ad_len;

    ret = ble_advertising_advdata_update(&m_advertising,&adv_data,true);

    NRF_LOG_DEBUG("update_adv_data result code =%d\n",ret);
}


void update_scan_rsp_data(uint8_t const *p_sr_data, uint8_t sr_len)
{
    ret_code_t ret;

    ble_gap_adv_data_t     adv_data;

    //sd_ble_gap_adv_stop(m_advertising.adv_handle);
    sd_ble_gap_adv_set_configure(&m_advertising.adv_handle,NULL,NULL);

    memcpy(&adv_data,&m_advertising.adv_data,sizeof(ble_gap_adv_data_t));

    memcpy(adv_data.scan_rsp_data.p_data,p_sr_data,sr_len);

    adv_data.scan_rsp_data.len = sr_len;

    ret = ble_advertising_advdata_update(&m_advertising,&adv_data,true);

    NRF_LOG_DEBUG("update_scan_rsp_data result code =%d\n",ret);
}


/**@brief Function for initializing the Advertising functionality.
 */
#if (TUYA_BLE_PROTOCOL_VERSION_HIGN==3)
static void advertising_init(void)
{
    uint32_t               err_code;
    ble_advertising_init_t init;
    uint8_t buf[22];
    uint8_t service_data[9];

    memset(buf,0,sizeof(buf));

    memset(&init, 0, sizeof(init));

    //init.advdata.name_type          = BLE_ADVDATA_FULL_NAME;
    init.advdata.include_appearance = false;
    init.advdata.flags              = BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE;//BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE;

    //init.advdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
    //init.advdata.uuids_complete.p_uuids  = m_adv_uuids;
    init.advdata.uuids_more_available.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
    init.advdata.uuids_more_available.p_uuids  = m_adv_uuids;

    ble_advdata_service_data_t service_data_array;
    service_data_array.service_uuid = 0xA201;
    service_data_array.data.p_data = service_data;
    service_data_array.data.size = 9;

    init.advdata.p_service_data_array = &service_data_array;
    init.advdata.service_data_count = 1;

    init.config.ble_adv_fast_enabled  = true;
    init.config.ble_adv_fast_interval = APP_ADV_INTERVAL;
    init.config.ble_adv_fast_timeout  = APP_ADV_DURATION;
    init.evt_handler = on_adv_evt;

    //scanrsp

    init.srdata.name_type          = BLE_ADVDATA_FULL_NAME;

    ble_advdata_t          scanrsp;
    memset(&scanrsp, 0, sizeof(scanrsp));
    ble_advdata_manuf_data_t p_vendor_data;

    p_vendor_data.company_identifier = 0x07D0;

    p_vendor_data.data.size = 22;

    p_vendor_data.data.p_data = buf;

    init.srdata.p_manuf_specific_data = &p_vendor_data;

    err_code = ble_advertising_init(&m_advertising, &init);
    APP_ERROR_CHECK(err_code);

    ble_advertising_conn_cfg_tag_set(&m_advertising, APP_BLE_CONN_CFG_TAG);
}
#else
static void advertising_init(void)
{
    uint32_t               err_code;
    ble_advertising_init_t init;
    uint8_t encry_device_id[DEVICE_ID_LEN];

    memset(&init, 0, sizeof(init));

    init.advdata.name_type          = BLE_ADVDATA_FULL_NAME;
    init.advdata.include_appearance = false;
    init.advdata.flags              = BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE;//BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE;

    //init.advdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
    //init.advdata.uuids_complete.p_uuids  = m_adv_uuids;
    init.advdata.uuids_more_available.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
    init.advdata.uuids_more_available.p_uuids  = m_adv_uuids;

    init.config.ble_adv_fast_enabled  = true;
    init.config.ble_adv_fast_interval = APP_ADV_INTERVAL;
    init.config.ble_adv_fast_timeout  = APP_ADV_DURATION;
    init.evt_handler = on_adv_evt;

    //tuya_aes_device_id_encrypt(tuya_para.pid,PRODUCT_ID_LEN,tuya_para.auth_settings.device_id,DEVICE_ID_LEN,encry_device_id);

    //scanrsp
    ble_advdata_t          scanrsp;
    memset(&scanrsp, 0, sizeof(scanrsp));
    ble_advdata_manuf_data_t p_vendor_data;

    p_vendor_data.company_identifier = 0x0259;

    p_vendor_data.data.size = 24+2;
    uint8_t buf[24+2];
    p_vendor_data.data.p_data = buf;
    p_vendor_data.data.p_data[0] = 0x00;
    p_vendor_data.data.p_data[1] = 0x02;
    //memcpy(p_vendor_data.data.p_data+2,tuya_para.pid,PRODUCT_ID_LEN);
    memset(p_vendor_data.data.p_data+2,0,8);
    memcpy(p_vendor_data.data.p_data+2+8,encry_device_id,16);
    init.srdata.p_manuf_specific_data = &p_vendor_data;


    err_code = ble_advertising_init(&m_advertising, &init);
    APP_ERROR_CHECK(err_code);

    ble_advertising_conn_cfg_tag_set(&m_advertising, APP_BLE_CONN_CFG_TAG);
}

#endif

/**@brief Function for initializing buttons and leds.
 *
 * @param[out] p_erase_bonds  Will be true if the clear bonding button was pressed to wake the application up.
 */
static void buttons_leds_init(bool * p_erase_bonds)
{
    bsp_event_t startup_event;

    uint32_t err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS, bsp_event_handler);
    APP_ERROR_CHECK(err_code);

    err_code = bsp_btn_ble_init(NULL, &startup_event);
    APP_ERROR_CHECK(err_code);

    *p_erase_bonds = (startup_event == BSP_EVENT_CLEAR_BONDING_DATA);
}


/**@brief Function for initializing the nrf log module.
 */
static void log_init(void)
{
    ret_code_t err_code = NRF_LOG_INIT(NULL);
    APP_ERROR_CHECK(err_code);

    NRF_LOG_DEFAULT_BACKENDS_INIT();
}


/**@brief Function for initializing power management.
 */
static void power_management_init(void)
{
    ret_code_t err_code;
    err_code = nrf_pwr_mgmt_init();
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for handling the idle state (main loop).
 *
 * @details If there is no pending log operation, then sleep until next the next event occurs.
 */
static void idle_state_handle(void)
{
    // app_sched_execute();
    tuya_ble_main_tasks_exec();

    if (NRF_LOG_PROCESS() == false)
    {
        //app_uart_close();
        nrf_pwr_mgmt_run();
        //uart_init();

    }
//    UNUSED_RETURN_VALUE(NRF_LOG_PROCESS());
//    nrf_pwr_mgmt_run();

}


/**@brief Function for starting advertising.
 */
static void advertising_start(void)
{
    uint32_t err_code = ble_advertising_start(&m_advertising, BLE_ADV_MODE_FAST);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for the Event Scheduler initialization.
 */
static void scheduler_init(void)
{
    APP_SCHED_INIT(SCHED_MAX_EVENT_DATA_SIZE, SCHED_QUEUE_SIZE);
}
uint8_t test_rtt_data[8] = {0x31,0x32,0xFF,0x34,0x31,0x32,0x33,0x34};
//char test_rtt_data[9] = "ff345678";
extern unsigned SEGGER_RTT_Write(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes);
#include "elog.h"
static void app_log_init(void)
{
    /* initialize EasyLogger */
    elog_init();
    /* set EasyLogger log format */
    elog_set_fmt(ELOG_LVL_ASSERT,  ELOG_FMT_LVL | ELOG_FMT_TAG | ELOG_FMT_TIME|ELOG_FMT_FUNC|ELOG_FMT_LINE);
    elog_set_fmt(ELOG_LVL_ERROR, ELOG_FMT_LVL | ELOG_FMT_TAG | ELOG_FMT_TIME|ELOG_FMT_FUNC|ELOG_FMT_LINE);
    elog_set_fmt(ELOG_LVL_WARN, ELOG_FMT_LVL | ELOG_FMT_TAG | ELOG_FMT_TIME|ELOG_FMT_FUNC|ELOG_FMT_LINE);
    elog_set_fmt(ELOG_LVL_INFO, ELOG_FMT_LVL | ELOG_FMT_TAG | ELOG_FMT_TIME);
    //elog_set_fmt(ELOG_LVL_DEBUG, ELOG_FMT_LVL);
    //elog_set_fmt(ELOG_LVL_VERBOSE, ELOG_FMT_LVL);
    /* start EasyLogger */
    elog_start();

}


/**@brief Application main function.
 */
int main(void)
{
    bool erase_bonds;

    // Initialize.
    uart_init();
    //log_init();
    app_log_init();
    timers_init();
    buttons_leds_init(&erase_bonds);
    power_management_init();
    ble_stack_init();
    //  scheduler_init();
    gap_params_init();
    gatt_init();
    services_init();
    advertising_init();
    conn_params_init();
//   app_rtc_config();    
    tuya_ble_app_init();
    advertising_start();
    
    
    
   // SEGGER_RTT_Write(0,test_rtt_data,8);
    
    // Enter main loop.
    for (;;)
    {
        idle_state_handle();
    }
}


/**
 * @}
 */