加入 Gitee
与超过 1200万 开发者一起发现、参与优秀开源项目,私有仓库也完全免费 :)
免费加入
文件
克隆/下载
cherryusb_config_template.h 4.03 KB
一键复制 编辑 原始数据 按行查看 历史
/*
* Copyright (c) 2022, sakumisu
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef CHERRYUSB_CONFIG_H
#define CHERRYUSB_CONFIG_H
#define CHERRYUSB_VERSION 0x000700
/* ================ USB common Configuration ================ */
#define CONFIG_USB_PRINTF(...) printf(__VA_ARGS__)
#define usb_malloc(size) malloc(size)
#define usb_free(ptr) free(ptr)
#ifndef CONFIG_USB_DBG_LEVEL
#define CONFIG_USB_DBG_LEVEL USB_DBG_INFO
#endif
/* Enable print with color */
#define CONFIG_USB_PRINTF_COLOR_ENABLE
/* data align size when use dma */
#ifndef CONFIG_USB_ALIGN_SIZE
#define CONFIG_USB_ALIGN_SIZE 4
#endif
/* attribute data into no cache ram */
#define USB_NOCACHE_RAM_SECTION __attribute__((section(".noncacheable")))
/* ================= USB Device Stack Configuration ================ */
/* Ep0 max transfer buffer, specially for receiving data from ep0 out */
#define CONFIG_USBDEV_REQUEST_BUFFER_LEN 256
/* Setup packet log for debug */
// #define CONFIG_USBDEV_SETUP_LOG_PRINT
/* Check if the input descriptor is correct */
// #define CONFIG_USBDEV_DESC_CHECK
/* Enable test mode */
// #define CONFIG_USBDEV_TEST_MODE
//#define CONFIG_USBDEV_TX_THREAD
//#define CONFIG_USBDEV_RX_THREAD
#ifdef CONFIG_USBDEV_TX_THREAD
#ifndef CONFIG_USBDEV_TX_PRIO
#define CONFIG_USBDEV_TX_PRIO 4
#endif
#ifndef CONFIG_USBDEV_TX_STACKSIZE
#define CONFIG_USBDEV_TX_STACKSIZE 2048
#endif
#endif
#ifdef CONFIG_USBDEV_RX_THREAD
#ifndef CONFIG_USBDEV_RX_PRIO
#define CONFIG_USBDEV_RX_PRIO 4
#endif
#ifndef CONFIG_USBDEV_RX_STACKSIZE
#define CONFIG_USBDEV_RX_STACKSIZE 2048
#endif
#endif
#ifndef CONFIG_USBDEV_MSC_BLOCK_SIZE
#define CONFIG_USBDEV_MSC_BLOCK_SIZE 512
#endif
#ifndef CONFIG_USBDEV_MSC_MANUFACTURER_STRING
#define CONFIG_USBDEV_MSC_MANUFACTURER_STRING ""
#endif
#ifndef CONFIG_USBDEV_MSC_PRODUCT_STRING
#define CONFIG_USBDEV_MSC_PRODUCT_STRING ""
#endif
#ifndef CONFIG_USBDEV_MSC_VERSION_STRING
#define CONFIG_USBDEV_MSC_VERSION_STRING "0.01"
#endif
#ifndef CONFIG_USBDEV_AUDIO_VERSION
#define CONFIG_USBDEV_AUDIO_VERSION 0x0100
#endif
#ifndef CONFIG_USBDEV_AUDIO_MAX_CHANNEL
#define CONFIG_USBDEV_AUDIO_MAX_CHANNEL 8
#endif
#ifndef CONFIG_USBDEV_RNDIS_RESP_BUFFER_SIZE
#define CONFIG_USBDEV_RNDIS_RESP_BUFFER_SIZE 128
#endif
#ifndef CONFIG_USBDEV_RNDIS_ETH_MAX_FRAME_SIZE
#define CONFIG_USBDEV_RNDIS_ETH_MAX_FRAME_SIZE 1536
#endif
#ifndef CONFIG_USBDEV_RNDIS_VENDOR_ID
#define CONFIG_USBDEV_RNDIS_VENDOR_ID 0x0000ffff
#endif
#ifndef CONFIG_USBDEV_RNDIS_VENDOR_DESC
#define CONFIG_USBDEV_RNDIS_VENDOR_DESC "CherryUSB"
#endif
#define CONFIG_USBDEV_RNDIS_USING_LWIP
/* ================ USB HOST Stack Configuration ================== */
#define CONFIG_USBHOST_MAX_RHPORTS 1
#define CONFIG_USBHOST_MAX_EXTHUBS 1
#define CONFIG_USBHOST_MAX_EHPORTS 4
#define CONFIG_USBHOST_MAX_INTERFACES 6
#define CONFIG_USBHOST_MAX_INTF_ALTSETTINGS 1
#define CONFIG_USBHOST_MAX_ENDPOINTS 4
#define CONFIG_USBHOST_DEV_NAMELEN 16
#ifndef CONFIG_USBHOST_PSC_PRIO
#define CONFIG_USBHOST_PSC_PRIO 4
#endif
#ifndef CONFIG_USBHOST_PSC_STACKSIZE
#define CONFIG_USBHOST_PSC_STACKSIZE 2048
#endif
//#define CONFIG_USBHOST_GET_STRING_DESC
/* Ep0 max transfer buffer */
#define CONFIG_USBHOST_REQUEST_BUFFER_LEN 512
#ifndef CONFIG_USBHOST_CONTROL_TRANSFER_TIMEOUT
#define CONFIG_USBHOST_CONTROL_TRANSFER_TIMEOUT 500
#endif
#ifndef CONFIG_USBHOST_MSC_TIMEOUT
#define CONFIG_USBHOST_MSC_TIMEOUT 5000
#endif
/* ================ USB Device Port Configuration ================*/
//#define USBD_IRQHandler USBD_IRQHandler
//#define USB_BASE (0x40080000UL)
//#define USB_NUM_BIDIR_ENDPOINTS 4
/* ================ USB Host Port Configuration ==================*/
#define CONFIG_USBHOST_PIPE_NUM 10
/* ================ EHCI Configuration ================ */
#define CONFIG_USB_EHCI_HCCR_BASE (0x20072000)
#define CONFIG_USB_EHCI_HCOR_BASE (0x20072000 + 0x10)
#define CONFIG_USB_EHCI_FRAME_LIST_SIZE 1024
// #define CONFIG_USB_EHCI_INFO_ENABLE
// #define CONFIG_USB_ECHI_HCOR_RESERVED_DISABLE
// #define CONFIG_USB_EHCI_CONFIGFLAG
// #define CONFIG_USB_EHCI_PORT_POWER
#endif
马建仓 AI 助手
尝试更多
代码解读
代码找茬
代码优化