From 04288974f6d81019314cbf9cbd72ab1fae95496f Mon Sep 17 00:00:00 2001
From: Michael Brown <mcb30@ipxe.org>
Date: Wed, 16 Feb 2022 12:30:02 +0000
Subject: [PATCH] [pci] Ensure that pci_read_config() initialises all fields

As per the general pattern for initialisation functions in iPXE,
pci_init() saves code size by assuming that the caller has already
zeroed the underlying storage (e.g. as part of zeroing a larger
containing structure).  There are several places within the code where
pci_init() is deliberately used to initialise a transient struct
pci_device without zeroing the entire structure, because the calling
code knows that only the PCI bus:dev.fn address is required to be
initialised (e.g. when reading from PCI configuration space).

Ensure that using pci_init() followed by pci_read_config() will fully
initialise the struct pci_device even if the caller did not previously
zero the underlying storage, since Coverity reports that there are
several places in the code that rely upon this.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Conflict:NA
Reference:https://github.com/ipxe/ipxe/commit/04288974f6d81019314cbf9cbd72ab1fae95496f
---
 src/drivers/bus/pci.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/src/drivers/bus/pci.c b/src/drivers/bus/pci.c
index 1b7350c8b8..5891e42ff4 100644
--- a/src/drivers/bus/pci.c
+++ b/src/drivers/bus/pci.c
@@ -121,6 +121,11 @@ static void pci_read_bases ( struct pci_device *pci ) {
 	unsigned long bar;
 	int reg;
 
+	/* Clear any existing base addresses */
+	pci->ioaddr = 0;
+	pci->membase = 0;
+
+	/* Get first memory and I/O BAR addresses */
 	for ( reg = PCI_BASE_ADDRESS_0; reg <= PCI_BASE_ADDRESS_5; reg += 4 ) {
 		bar = pci_bar ( pci, reg );
 		if ( bar & PCI_BASE_ADDRESS_SPACE_IO ) {